Download 2.0L FORD FOCUS Supercharger System Installation Instructions 2000-2003 ZX3 Model 2002-2003 SVT Model. A. Remove the ducting between the air box and the throttle body. Disconnect the MAF from the ducting and set aside. B. Remove the air box, fresh air tube, battery, battery box and all remaining components running to the inlet of the motor. C. Remove the Battery/Air Box support bracket: 1. Support the driver’s side of the transmis- sion. 2. Remove four nuts securing the bracket to the driver’s side engine mount. 3. Remove the large central nut securing the transmission to the engine mount. 4. Lift the plate on top of the engine mount and remove the Battery/Air Box support bracket. (See Fig. 1-a .) 5 . Reinstall the engine mount plate and resecure all engine mount hardware. D. Place an oil drain pan beneath the power steering pump. Disconnect the high-pressure (3/8″ tube) power steering line from the power steering pump. Disconnect the opposite end of the power steering line from the steering rack. Disconnect all other supports securing the power steering line and remove it from the car. E. From under the vehicle, remove the plastic cover protecting the belts and pulleys. F. From under the vehicle, release the tension on the accessory drive belt and remove the drive belt. G. Disconnect the fill hose from the power steering pump. Remove the four screws securing the power steering pump and remove the power steering pump from the vehicle. H. Drain sufficient coolant to remove and relocate the plastic upper coolant manifold located near the upper radiator core support. (See Fig. 4-c .) I. ZX3 Only: Remove the four screws securing the heat shield to the header. Remove the heat shield. J. Locate the PCV valve located near the driver’s side of the exhaust manifold on the front of the engine. Pull the stock PCV valve and install the supplied PCV valve in its place. K. Remove the screws and pushpins securing the front bumper cover. Remove the front bumper cover from the car.
The post 2.0L FORD FOCUS Supercharger System Installation Instructions appeared first on ToManual.com.
